In an attempt to drive a greener environment the EU Directive for Energy Performance of Buildings plays a key role in the UK building regulations. It is now a requirement to provide an Energy Performance certificate (EPC) to identify the carbon footprint of any building and to use this information to consider improved opportunities to reduce energy performance.
News, Updates and More...
Also known as the let-through voltage, this specifies what spike voltage will cause the protective components inside a surge protector to divert unwanted energy from the protective line/equipment.
The standard let-through voltage for 120 V AC devices is 330 volts.
Lightning protection systems are used to prevent or lessen lightning strike damage to structures.
A lightning protection system provides a low-impedance path for the lightning current to lessen the heating effect of current flowing through flammable structural materials.
It is important when installing lighting or any form of electrics in a bathroom that a certified and competent electrician carries out the work. The work that they carry out must conform to Part P of the Building Regulations along with the 17th edition of BS 7671:2008 Amn 3 Requirements for Electrical Installations (Wiring Regulations).
When choosing LED lights, you need to be aware that some models can only work if a dimmer switch is installed to operate them: "Unlike incandescent lamps, specific types of LEDs (light emitting diodes) need to be selected if dimming controls are to be used.
The scope of Section 753 will be extended to apply to embedded electric heating systems for surface heating. They also apply to electric heating systems for de-icing or frost prevention or similar applications, and cover both indoor and outdoor systems. These include heating systems for walls, ceilings, floors, roofs, drainpipes, gutters, pipes, stairs, roadways and non-hardened compacted areas (for example, football fields, lawns). Heating systems for industrial and commercial applications complying with IEC 60519 and IEC 62395 are not covered.
With the 18th Edition to the Wiring Regulations not too far off (it’s due to publish 1st July 2018), Section 443 is likely to be significantly revised based on the recently released IEC and CENELEC publications. The exact requirements still have to be agreed by the UK national committee. Presuming the IET follows the IEC and CENELEC standards.
So you’re about to work on an energised distribution board/panel. You have looked over the arc flash label on the board/panel and determined what personal protective equipment you require. You get dressed in the appropriate PPE and are now much more protected in the event of an arc flash.
In an effort to reduce energy consumption and meet carbon targets, the UK government has committed to rolling out smart meters for businesses and homes across the country by the year 2020. A major energy infrastructure project in the UK, the Smart Metering Implementation Programme will see the replacement or upgrading of over 50 million electricity and gas meters across England, Wales, and Scotland.
Smart meters allow customers to control their energy consumption and manage costs. Smart meters will provide a catalyst for a more efficient and smarter energy system as well as data to make investment decisions for the UK’s energy infrastructure, he added.
Electrical engineering first got recognition during the late nineteenth century, when electrical power supply and electrical telegraphs became commercial. Today, an electrical engineer specialises in the general application of electronics and electricity. Such specialists deal with problems associated with electronic systems.
A career in electrical engineering will require a certain amount of training to insure that you are able to fulfil the needs and requirements of a trained professional. Working with electricity is something that is regulated by licensed professionals to ensure the health and safety of both those servicing the industry as well as those living with the electrical workings.
Training in this profession should keep you busy for a long time to come, even through economic ups and downs. For this reason, you should consider getting trained at one of the very best organisations for electrical engineering - Wyre Associates. Here are just some of the reasons our training centre can help you along the path you are looking to enter.
If you’re considering getting certified as a professional electrical engineer in the UK there are a few things you may want to consider about this important career. Not least of which is the education and government laws surrounding who is qualified to do the work. Numerous universities offer a bachelor’s degree in this field of specialisation, however, those interested can also enhance their skill through different accredited training programs.
Electrical engineering is one career, which will never go out of demand. As a matter of fact, Electrical engineering is one of the most sought after courses worldwide. There are many training centres that offer electrical engineer training around the UK, for aspiring electrical engineers. Wyre Associates Electrical Engineer Training is one training institute, which has been around since 2005.
If you are thinking about changing careers, one growing sector that you might want to look into is electrical engineering. Not only are there numerous courses available to help you grow within the profession, but there are plenty of opportunities to branch out into different specialisms too.
The overall outlook for the field of electrical engineering is very good. In the next seven years it is projected that there will be about 1.86 million jobs opening up that will require some type of engineering skills. Out of these, another 87,000 per year are going to require degree qualifications or specialist skills acquired by taking part p courses or other similar certifications.
The Beginning: Static Electricity: Back in 600 BC, Thales of Miletus rubbed together fur and amber, soon discovering that there was some type of attraction. He also noted that if you continued to rub the two materials together a spark would be created. What he had discovered was static electricity, although it would be years before anyone coined the term or could even explain why this happened.
New figures reveal that women are not pursuing the engineering field in very large numbers. This is a concern given the fact that the engineering field is expected to grow over the next few years. If the field were to continue to support the UK economy it would need at least 96,000 new engineers and scientists by the year 2016.
If you have just entered the engineering field as an electrical engineer you might be wondering how you can further develop your career. Of course, you do not want to pursue electrical training that is not going to help you, so it is important that you know the best way to move forward.
If you are working on completing electrical engineer training and approaching your part p courses, you might start to wonder what the entry level requirements for an electrical engineer are? And, if your part p training is going to help you find an entry level job once you graduate?
The job outlook for electrical engineers in the UK is pretty bright with plenty of vacancies for those who have the skills needed to fill the slots. There are many entry level positions available and after a few years on the job, experience will aid most electrical engineers into getting a much higher salary.
If the idea of being an electrical engineer interests you, then you may be looking into an undergraduate degree or at least a foundation degree. However, before spending your money on electrical training and part p courses you might want to look into what an electrical engineer does in more depth.
Providing Electrical Safety for Customers Every electrical training course puts health and safety first and foremost in its practices. The students who train with us have a much better grasp of safety and safety policies.
The City & Guilds 2392-10 Fundamental Inspection, Testing & Initial Verification course is a level 2 qualification for electrical contractors and was specially designed in partnership with the electrical industry. The course provides a structured, well-paced introduction to the testing and inspection of new electrical installations.
Why Become an Electrical Engineer? Of the varied careers that are out there you may wonder why you should put the time, effort and money into training to become an electrical engineer, however there is scarcely a better career for surviving the recession and taking you forward.
There are many who still do not understand the differences between an electrical engineer and an electronics engineer, and to be honest there is quite a thin line between the two professions. Those who are not familiar with the different work undertaken by the two professions could be mistaken for thinking they want one, when it is in fact the other.
In this age of new technology, the development of careers in engineering has never been stronger. The field of electrical engineering being particularly prevalent. There is often some confusion between electrical engineering and other jobs in the same sector, such as electronics engineering. So here is a run down of what the job of electrical engineer entails, and what is expected of you as a proponent of this branch of engineering.
Electrical engineering, in general, is a highly popular career choice. This is largely due to the field providing a wide range of exciting challenges, as well as job satisfaction and good financial rewards. With more and more looking into becoming an electrical engineer, colleges and universities are responding positively by providing the relevant programmes and courses needed to train the next generation.
Anyone who is currently involved in the repair, maintenance or installation of electrical fittings in the UK should view attending a 17th Edition training course as essential. For instance, if they intend to go on to complete the City and Guilds qualification, they will need to be formally certified and thus be fully compliant with the current regulations regarding wiring.
Any type of training is required for upgrading your basic skill sets and knowledge. An adequate training is the first stage in your efforts to fulfil your professional aspirations and getting an electrical certification and reporting is no different. Those who will decide to take thorough training in the different areas of electrical applications will learn how to act in different situations and scenarios that might happen while they are working. Electrical training courses that are conducted by reputed companies like Wyre Associates Electrical Engineering Training will help participants to improve their chances of getting a job in well-established companies and ultimately improve the quality of their lives. Because of the special knowledge acquired during these courses, the interest in these courses is constantly growing. This means that the availability of these training courses is increased too.
A periodic inspection is a type of inspection and related testing to inspect whether an electrical installation is in a suitable condition for providing proper and safe service. Once the required inspection and testing is finished, the certified professional will prepare an electrical installation condition report in which you can find the details about possible deterioration, damages, malfunctioning and conditions that might lead to dangerous situations. In other words, this is a very serious and responsible duty that can be performed only by qualified technicians.
Although the global financial crisis is behind us, the fact is that the job market is not very attractive these days. The good news is that there are certain professions that are still popular and wanted and being an electrician is one of them. If you are interested in becoming a trained electrician, you will need to take certain courses. The more courses you finish, the greater the chances to find a job. One of the most popular courses specially designed for electricians is the initial verification and certification course.
There are only a small number of people who are aware of the fact that the wiring regulations in the UK were introduced more than 130 years ago (1882). The authorities back then have acknowledged the fact that this activity can be quite dangerous if it is not performed in the right way. That’s why they have created regulations that can prevent accidents caused by lighting circuits and they were especially focused on the accidents related to fire. Even the title of the first edition can confirm this.
In оrdеr to apply the guіdаnсе, you need to undеrѕtаnd thаt in any fіrе situation, thе tіmе thаt реорlе have to escape bеfоrе thеу соuld bесоmе affected bу the fire іѕ lіmіtеd. Prоvіdіng thеm with ѕuffісіеnt time uѕuаllу mеаnѕ that аѕ well аѕ hаvіng appropriate wау оf dеtесtіng and gіvіng wаrnіng in саѕе оf fіrе, thе distance thаt people hаvе to travel tо mаkе their escape to a рlасе оf rеаѕоnаblе оr total ѕаfеtу muѕt bе rеѕtrісtеd.
Fіrеfіghtеrѕ ѕwіtсh is a ѕресіаlіzеd ѕwіtсh thаt аllоwѕ fіrеfіghtеrѕ to ԛuісklу dіѕсоnnесt роwеr frоm an electrical installation that mау pose a dаngеr in thе еvеnt of аn еmеrgеnсу.
Fіrеfіghtеrѕ have tо dеаl with threats bеуоnd juѕt fіrе іtѕеlf. In recent уеаrѕ the numbеr оf рhоtоvоltаіс іnѕtаllаtіоnѕ іn both rеѕіdеntіаl аnd nоn-rеѕіdеntіаl buіldіngѕ has increased enormously throughout the wоrld, and that number іѕ еxресtеd tо continue grоwіng in thе соmіng уеаrѕ.
“Smart grid” generally refers to a class of technology that people are using to bring utility companies delivery systems into the 21st century, using computer-based remote, control and automation. These systems are made possible by two-way communication technology and computer processing that has been used for decades in other industries.